Natural Ore Washing Machine , Sand Washing Unit 0-10mm Feeding Size AC Motor

(The sand was washed twice, get cleaner sand output.)

Working principle

When the equipment is running, the material that has been treated in the previous stage enters the first water storage tank. The first grinding wheel starts to rotate through the motor and the speed reducer, and the material in the first water storage tank is picked up from the water and passed through the washing wheel. The mesh leaks the water and the material below the mesh size, and transfers the qualified material to the second storage tank. During the rotation of the grinding wheel, the material is in full contact with the water, and the water is used to remove the impurities on the surface of the material. Make the material cleaner.

Then the second washing wheel repeats the process of the first washing wheel to clean the material twice. The cleaned material enters the dewatering device, and the large amount of water is removed by the vibration of the dewatering device, so that the material is more convenient to store and transport. For the material leaked in the water storage tank, the water pump enters the water pump at the end of the machine, and is pumped to the separation and recovery device for concentration and recovery. After concentration, the qualified materials are returned to the dewatering device for dehydration and collection, and the excess wastewater Impurities are discharged into the return tank.

Structure